Create New Template
For the Multi Purpose Excieo model select which type of template you wish to
create by selecting one of the listed options or to return to the previous screen
without creating a template press Soft Key 1 labelled EXIT.
SINGLE or HARM Excieo variations do not allow the creation of other types of
templates and hence as no selection is required you are taken directly to the
selectable options for the model variation type.
26:08:11
CREATE TEMPLATE
1. HARM
2. WBV
3. Single Axis
4. Custom
Select Template Type
EXIT
Figure 80 – Create Template
A maximum of 6 templates can be created and saved for each mode, if no
space is available to create a template the message 'No free slots' will be
displayed. Existing templates would need deleting before new templates can be
created.
The available options when creating a template differ depending on the template
mode that is being created. Default options are shown below: -
HARM
26:08:11
1. Time History [OFF]
2. Timer [OFF]
3. Results [VS]
EXIT
Figure 81 - Default Template Options (HARM, WBV)
09:41:00
09:41:10
EDIT
SAVE
Page 70
WBV
26:08:11
1. Time History [OFF]
2. Timer [OFF]
3. Results [Dom]
EXIT
09:41:20
EDIT
SAVE