Option 2 -Timer; Figure 22 - Toggle Measurement Time On / Off; Figure 23 - Measurement Duration Time Entry - Castle group Excieo GA2005H Operating Manual

Option 2 –Timer
Measurement Time is setup whilst in real time mode but is used whilst
recording. If the option is turned ON then if a recording is started, its time
period is governed by the set measurement time period.
automatically stops once the measurement time has elapsed.
Press 1 on the keypad to toggle Measurement Time ON /OFF.
26:08:11
MEASUREMENT TIMER
1. Timer : [OFF]
2. Duration
CANCEL
Figure 22 – Toggle Measurement Time ON / OFF
Press 2 on the keypad to enter the Interval Time using the numeric keypad. The
maximum interval time permitted is 23:59:59 (hh:mm:ss). Invalid entries will
display an 'Out of range' message and return the value to its previous state. To
delete errors use the Left Arrow Key
26:08:11
MEASUREMENT TIMER
1. Timer : [ON]
2. Duration
CANCEL
Figure 23 – Measurement Duration Time Entry
Press Soft Key 1 labelled CANCEL to discard any changes or Soft Key 4
labelled APPLY to make any changes made.
09:04:00
00:01:00
APPLY
09:04:04
_ : :
APPLY
Page 30
MEASUREMENT TIMER
1. Timer : [ON]
2. Duration
CANCEL
.
Numeric Entry Prompt
The recording
09:04:02
26:08:11
APPLY