Option 4 - Filters; Figure 39 - Single Axis Filter Selection - Castle group Excieo GA2005H Operating Manual

Option 4 – Filters
The following frequency weighted filters are available whilst in Single Axis mode: -
Filter
Ws Vibration monitoring between 10 and 1000 Hz
Fa Vibration monitoring between 2 and 20 Hz
Fb Vibration monitoring between 2 and 250 Hz
Fc Vibration monitoring between 31.5 and 250 Hz
Suitable for monitoring at any frequency within the instruments
Fl or accelerometers tolerance and without applying high or low
frequency roll off within the linear region specified.
Selection of the filter has immediate effect in Real Time Mode and is applied to
any subsequent recordings.
Press 1 to activate Filter selection and then use the Left and Right Arrow Keys
to scroll through the available filters.
26:08:11
1. Single Axis: Fa
CANCEL

Figure 39 - Single Axis Filter Selection

Press Soft Key 1 labelled CANCEL to discard any changes or Soft Key 4
labelled APPLY to make any changes made.
Description
09:11:20
FILTERS
Page 40
26:08:11
1. Single Axis: Fb
CANCEL
09:11:30
FILTERS
APPLY