Loading Templates Within Setup; Figure 18 - Loading A Template From Within Setup - Castle group Excieo GA2005H Operating Manual

Loading Templates Within Setup

Six template slots exist for each display mode. Slots that have no template are
listed as 'Empty'.
If a template has been saved in a slot then the template name will be shown. To
open a template press its corresponding number using the numeric keypad.
In the example below, pressing 1 on the keypad would show the TEMPLATE
DETAILS screen for the template named TEST. The template can then be
loaded, edited or deleted.
26:08:11
HARM TEMPLATES
1. TEST
2. Empty
3. Empty
4. Empty
5. Empty
6. Empty
Select Template
EXIT

Figure 18 - Loading A Template From Within Setup

To Load the template press Soft Key 2 labelled LOAD.
Pressing Soft Key 3 labelled EDIT allows you to edit the settings of the template.
To delete the template press Soft Key 4 labelled DELETE.
If the TEMPLATE DETAILS screen is displayed then pressing Soft Key 1 labelled
EXIT will return back to the previous screen which enables you to open a
different template. If Soft Key 1 labelled EXIT is pressed whilst displaying the
selected modes TEMPLATES screen then you will return to the Real Time
measuring screen.
See Templates under Main Menu for more information.
09:02:12
Page 27
26:08:11
TEMPLATE DETAILS
1. Time History [ON]
2. Measure Time [OFF]
3. Results [VS]
EXIT LOAD
09:02:14
EDIT DELETE