Single Axis Vibration Mode (SINGLE)
Option 1 – Time History
Time History is setup whilst in real time mode but is used whilst recording. If the
option is turned ON then interval data is recorded with the log at the interval
time set.
Press 1 on the keypad to toggle Time History ON /OFF.
26:08:11
1. Time History : [OFF]
2. Interval
CANCEL
Figure 34 – Toggle Time History ON / OFF
Press 2 on the keypad to enter the Interval Time using the numeric keypad. The
maximum interval time permitted is 23:59:59 (hh:mm:ss). Invalid entries will
display an 'Out of range' message and return the value to its previous state. To
delete errors use the Left Arrow Key
26:08:11
1. Time History : [ON]
2. Interval
CANCEL
Figure 35 –Time Interval Entry
Press Soft Key 1 labelled CANCEL to discard any changes or Soft Key 4
labelled APPLY to make any changes made.
09:09:00
TIME HISTORY
00:01:00
APPLY
09:09:04
TIME HISTORY
_ : :
APPLY
1. Time History : [ON]
2. Interval
CANCEL
.
Numeric Entry Prompt
Page 37
09:09:02
26:08:11
TIME HISTORY
00:01:00
APPLY