Table of Contents
Advertisement
Units
To adjust the working units and reference levels of the instrument select option
2 from the GLOBAL SETTINGS menu, the default settings are shown below: -
26:08:11
1. Units : Metric
2. dB Reference : 1e-6
EXIT
Figure 96 – Units
From the displayed list select option 1 to change the working units or option 2 to
change the dB reference level. Press Soft Key 1 labelled EXIT to return to the
previous screen.
For either selection, use the Left and Right Arrow Keys
the list of available settings, press OK to confirm the required selection or press
Soft Key 1 labelled CANCEL to cancel and return to the previous screen.
See Measuring Ranges and also Overload & Under Range Triggering Points
under Chapter 3 for the effects of changing units and/or the dB reference
level. The available settings are as follows: -
Metric (default)
dB Reference Level
1e
09:48:00
UNITS
Units
g
dB
Imperial
-5
1e
-6
(default)
Page 82
26:08:11
1. Units : dB
2. dB Reference : 1e-6
< > to select, OK to accept
CANCEL
09:48:05
UNITS
to scroll through
Advertisement
Table of Contents
