Saving The Recording; Figure 54 - Save Recording Display & Entry Screen - Castle group Excieo GA2005H Operating Manual

Saving The Recording

Pressing Soft Key 4 labelled SAVE from the Calculation Display Screen will take
you to the Save Recording display and entry screen.
This screen is identified with SAVING LOG displayed under the real time clock.
26:08:11
1. Record:
2. Employee:
3. Tool:
4. Location:
EXIT
Figure 54 – Save Recording Display & Entry Screen
Press 1, 2, 3 or 4 to enter specific details to be saved with the recording. A
prompt will appear at the right hand side of your selected field awaiting input
from the keypad.
If the field accepts numbers and letters then you can switch between these
using Soft Key 2 which will be labelled NUMBER or LETTER.
If the field accepts letters then you can toggle between uppercase and
lowercase using Soft Key 3 labelled either LOWER or UPPER.
Where text entry is allowable you can enter a space using Soft Key 4 labelled
SPACE.
To delete errors use the Left Arrow Key
To accept any field entry press OK.
When you have entered all details press Soft Key 4 labelled SAVE to save your
recording and any details entered, to the internal flash memory. Over 3000
recordings without time histories can be saved.
Recordings saved on your instrument will not be lost when the batteries are
removed.
09:21:00
SAVING LOG
SAVE
Page 55
26:08:11
1. Record: _
2. Employee:
3. Tool:
4. Location:
OK to accept
EXIT
.
09:21:02
SAVING LOG
Entry Prompt