Table of Contents
Advertisement
Display
To adjust the contrast and the backlight timeout setting select option 3 from the
GLOBAL SETTINGS menu, the default settings are shown below: -
26:08:11
1. Contrast:
2. Backlight: 10 sec
EXIT
Figure 97 – Display Settings
From the displayed list select option 1 to change the display contrast or option 2
to change the backlight timeout setting. Press Soft Key 1 labelled EXIT to
return to the previous screen.
For either selection, use the Left and Right Arrow Keys
through the list of available settings and press OK to confirm the required
selection. Press Soft Key 1 labelled CANCEL to cancel and return to the
previous screen.
The available backlight timeout settings are as follows: -
Backlight Timeout
5 seconds
10 seconds (default)
30 seconds
The backlight timeout occurs when the backlight is switched on using the
backlight key of the keypad. The backlight switches off automatically after the
timeout period selected. If the timeout period is set to On then the backlight will
remain on permanently unless switched off via the keypad. Use of the backlight
reduces the operational time of the batteries.
09:49:00
DISPLAY
On
1 minute
1. Contrast:
2. Backlight: 10 sec
< > to select, OK to accept
CANCEL
Page 83
09:49:10
26:08:11
DISPLAY
to adjust or scroll
Advertisement
Table of Contents
