Option 3 – Results
Measurements for Hand Arm Vibration can be displayed as Vector Sum,
Dominant Axis or both. Although the method to display the Results is selected in
Real Time mode, the selection determines what is recorded when a recording is
taken. The Vector Sum or Dominant Axis results are cumulative figures and
therefore can only be viewed from a completed recording.
Press 1 on the keypad to toggle the display of Vector Sum ON /OFF or press 2
to toggle the display of Dominant Axis ON / OFF.
26:08:11
1. Vector Sum [ON]
2. Dominant Axis [OFF]
Select Result to Toggle
CANCEL
Figure 24 – HARM Results Selection
Press Soft Key 1 labelled CANCEL to discard any changes or Soft Key 4
labelled APPLY to make any changes made.
09:05:00
RESULTS
APPLY
Page 31
26:08:11
1. Vector Sum [OFF]
2. Dominant Axis [ON]
Select Result to Toggle
CANCEL
09:05:02
RESULTS
APPLY