Attaching & Removing Accelerometers; Figure 2 - Attaching Accelerometers To The Instrument - Castle group Excieo GA2005H Operating Manual

Attaching & Removing Accelerometers
On the accelerometer cable locate the orientation key, and on the instrument
locate the RED keying identification mark. Position the accelerometer cable so
that the orientation key is in line with the RED mark and then gently push the
accelerometer cable into the instruments socket.
Figure 2 – Attaching Accelerometers to the Instrument
To unlatch and remove the accelerometer cable gently pull the on the knurled
part of the stem and pull the accelerometer from the instrument.
Page 5