Option 3 - Results; Figure 45 - Custom Mode Results Selection - Castle group Excieo GA2005H Operating Manual

Option 3 – Results
Measurements for Custom Mode Vibration can be displayed as any combination
of the following: -

Vector Sum

Dominant Axis

VDV
Although the method to display the Results is selected in Real Time mode, the
selection determines what is recorded when a recording is taken. The Vector
Sum, Dominant Axis and VDV results are all cumulative figures; therefore they
can only be viewed from a completed recording.
VDV results are only recorded for metric units.
Press 1 on the keypad to toggle the display of Vector Sum ON /OFF.
Press 2 to toggle the display of Dominant Axis ON / OFF.
Press 3 to toggle the display of VDV ON / OFF.
26:08:11
1. Vector Sum [OFF]
2. Dominant Axis [ON]
3. VDV [OFF]
Select Result to Toggle
CANCEL
Figure 45 – Custom Mode Results Selection
Press Soft Key 1 labelled CANCEL to discard any changes or Soft Key 4
labelled APPLY to make any changes made.
09:15:00
RESULTS
APPLY
Page 44
26:08:11
1. Vector Sum [ON]
2. Dominant Axis [OFF]
3. VDV [ON]
Select Result to Toggle
CANCEL
09:15:02
RESULTS
APPLY