Emerson SI-Universal User Manual page 92

1x.097
Minimum
Default
Type
Display Format
Coding
See Encoder Simulation Mode (1x.088).
1x.098
Minimum
Default
Type
Display Format
Coding
Value
0
1
2
Encoder Simulation Output Mode (1x.098) is used to select the format of the encoder simulation
output as given in the table below.
Encoder Simulation Mode
(1x.088)
Hardware (0),
Lines Per Rev (1),
Ratio (2)
Hardware (0),
Lines Per Rev (1),
Ratio (2)
Hardware (0),
Lines Per Rev (1),
Ratio (2)
SSI (3)
SSI (3)
FR encoder simulation output mode is not available if Encoder Simulation Mode (1x.088) is set to
Hardware. FR encoder simulation output mode is available if Encoder Simulation Mode (1x.088) is
set to Lines Per Rev or Ratio.
92
Encoder Simulation SSI Comms Bits
2
33
8 Bit User Save
None
RW
Encoder Simulation Output Mode
0
0
8 Bit User Save
None
RW, Txt
Text
AB/Grey
FD/Binary
FR/Binary
Encoder Simulation
Output Mode (1x.098)
AB/Gray
FD/Binary
FR/Binary
AB/Gray
FD/Binary, FR/Binary
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
AB quadrature signals
Frequency and direction signals
Forward and reverse signals
The position data is in Gray code format.
This does not include the "power supply"
bit if present.
The position data is in binary format
SI-Universal Encoder User Guide
48
Background read
0
2
Background read
0
Format
Issue: 2