Emerson SI-Universal User Manual page 53

Figure 7-4 P1 Position feedback interface thermistor input
P1 Thermistor
Feedback
1x.119
7.2.3 Menu 1x P1 Interface parameter descriptions
1x.001
Minimum
Default
Type
Display Format
Coding
This parameter shows the module ID code. The module ID for the SI-Universal Encoder module is
106.
1x.002
Minimum
Default
Type
Display Format
Coding
Module firmware version in ww.xx.yy.zz format.
1x.003
Minimum
Default
Type
Display Format
Coding
Contains the module's hardware version information in the format xx.yy.
SI-Universal Encoder User Guide
Issue: 2
{Slotx Error.Motor Th SC}
trip detect
{Slotx Error.Motor Th} trip detect
P1 Thermistor Type ( 1x.118
P1 Thermistor Trip Threshold 1x.120
P1 Thermistor Reset Threshold 1x.121
Resistance to temperature conversion
P1 Position feedback interface thermistor input
Module ID
0
16 Bit Volatile
None
RO, ND, NC, PT, BU
Software Version
0
(Display: 00.00.00.00)
32 Bit Volatile
Version Number
RO, ND, NC, PT
Hardware Version
0.00
16 Bit Volatile
None
RO, ND, NC, PT
P1 Thermistor Fault
Detection ( 1x.123 )
0
{Slotx Error.Motor Th SC}
1
)
{Slotx Error.Motor Th}
( )
( )
P1 Thermistor
Temperature
1x.122
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
65535
Power-up write
0
999999
(Display: 99.99.99.99)
Power-up write
0
99.99
Power-up write
2
53