Emerson SI-Universal User Manual page 90

1x.089
Minimum
Default
Type
Display Format
Coding
If hardware mode is selected (i.e. Encoder Simulation Mode (1x.088) = 0) then Encoder Simulation
Hardware Divider (1x.089) defines the divider ratio between the device connected to the P1
position feedback interface and the output as 1/2 Encoder Simulation Hardware Divider (1x.089).
The maximum allowed input frequency is 500 kHz, and so the maximum output frequency with the
highest ratio of unity is 500 kHz.
1x.089 value
0
1
2
3
4
5
6
7
NOTE
The scaling function provided by Pr 1x.089 is not available when Pr 1x.085 = 03.029, see section
6.3 Encoder Simulation Output Set-up on page 41 for further details.
1x.090
Minimum
Default
Type
Display Format
Coding
See Encoder Simulation Mode (1x.088).
1x.091
Minimum
Default
Type
Display Format
Coding
See Encoder Simulation Mode (1x.088).
90
Encoder Simulation Hardware Divider
0
0
8 Bit User Save
None
RW
Ratio
1/1
1/2
1/4
1/8
1/16
1/32
1/64
1/128
Encoder Simulation Hardware Marker Lock
0
0
8 Bit User Save
None
RW
Encoder Simulation Incremental Mode Select
0
0
8 Bit User Save
None
RW
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
Maximum
Units
Update Rate
Decimal Places
SI-Universal Encoder User Guide
7
Background read
0
1
Background read
0
1
Background read
0
Issue: 2