Emerson SI-Universal User Manual page 55

1x.007
Minimum
Default
Type
Display Format
Coding
When set, the module performs a warm reset. When the reset has been performed and the module
is performing its initialization routines, the parameter will be cleared to zero.
NOTE
The drive, and any other modules installed on the drive will not be affected by the reset.
1x.024
Minimum
Default
Type
Display Format
Coding
Shows the internal temperature of the module
1x.025
Minimum
Default
Type
Display Format
Coding
Indicates which slot number the module is installed in.
1x.026
Minimum
Default
Type
Display Format
Coding
Indicates the menu number of the main set-up menu for the module.
SI-Universal Encoder User Guide
Issue: 2
Module Reset
0
0
1 Bit Volatile
None
RW, NC
Module Temperature
-128
16 Bit Volatile
None
RO, ND, NC, PT
Slot Indicator
0
8 Bit Volatile
None
RO, ND, NC, PT
Slot Menu Number
0
8 Bit Volatile
None
RO, ND, NC, PT, BU
Maximum 1
Units
Read every 200 ms.
Update Rate Written to 0 on module
initialization
Decimal Places 0
Maximum 127
°C
Units
Update Rate Background write
Decimal Places 0
Maximum 8
Units
Update Rate Power-up write
Decimal Places 0
Maximum 255
Units
Update Rate Power-up write
Decimal Places 0
55