Related Manuals for Emerson NetSure C48/24-1500
Summary of Contents for Emerson NetSure C48/24-1500
- Page 1 ™ NetSure DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Specification Number: 1C48241500 Model Number: C48/24-1500...
- Page 2 NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) This page is intentionally blank. Spec. No: 1C48241500 Code: UM1C48241500 Model No: C48/24-1500 Revision E, July 20, 2015...
-
Page 3: Table Of Contents
NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Table of Contents Admonishments Used in this Document ........................ ii Static Warning ..............................iii Introduction ................................. 1 Overview ................................1 Specifications ................................. 1 Operation ................................4 Local Indicators ............................... 4 Converter High Voltage Shutdown and Lockout Restart ................... -
Page 4: Admonishments Used In This Document
NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Admonishments Used in this Document DANGER! Warns of a hazard the reader will be exposed to that will likely result in death or serious injury if not avoided. (ANSI, OSHA) Danger WARNING! Warns of a potential hazard the reader may be exposed to that could result in death or serious injury if not avoided. -
Page 5: Static Warning
Before touching any equipment containing static sensitive components, discharge all static electricity from yourself by wearing a wrist strap grounded through a one megohm resistor. Some wrist straps, such as Emerson Network Power Part Number 631810600, have a built-in one megohm resistor; no external resistor is necessary. Read and follow wrist strap manufacturer’s instructions outlining use of a specific wrist strap. - Page 6 NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) This page is intentionally blank. Spec. No: 1C48241500 Code: UM1C48241500 Model No: C48/24-1500 Revision E, July 20, 2015...
-
Page 7: Introduction
NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Introduction DC Input Ratings • Voltage: Nominal -48 volts DC. Overview • Nameplate Rating: -41 to -58.5 Vdc, 39.5A max. The C48/24-1500 is a compact DC/DC converter module which offers efficient power conversion. - Page 8 NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) • • Storage Ambient Temperature Range: -40°C to +70°C Radiated Emission: For electrical field, meets EN55022 (-40°F to +158°F). Class A between 150KHZ-30MHZ. For a standalone converter the levels are 6db below the class A limits. •...
- Page 9 NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) • Table 2. Monitoring Function Cooling: Each converter module contains a fan for forced convection cooling. Commands / signals that can Information gathered by the Fan Fault Protection: The converter module shuts be received by the Converter Controller from the Converter down and its alarm indicator (red) flashes if the fan...
-
Page 10: Operation
NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Operation Manual menu in the LCD menus or under the Converter Control Tab in the WEB Interface). Local Indicators Converter Current Limit Location and Identification: Refer to Figure When setting total converter current limit, the set point to each Description: There are three (3) indicators located on the... -
Page 11: Installing Converter Modules
NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Installing Converter Modules Figure 2. Installing Converter Module Converter modules can be inserted or removed with power applied (hot swappable). Note: Each converter module locks into a module mounting shelf by means of a latch located on the bottom of the module. - Page 12 NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Converter Module Fault Symptoms and Troubleshooting The fault indicators that can be displayed by the converter module are as follows. Refer to Table 4 for a list of possible causes and corrective actions. •...
-
Page 13: Replacement Procedures
NetSure ™ DC/DC Converter Module User Manual, UM1C48241500 (Revision E, July 20, 2015) Replacement Procedures Loosen the captive screw on the module’s handle. Pull the handle down out from the module’s front panel (this Converter Module Replacement will also retract the latch mechanism). See Figure Converter modules can be inserted or removed with power applied Grasp the handle and pull firmly to remove the module... - Page 14 Emerson Network Power, Energy Systems, North America, Inc. and contains confidential and proprietary information owned by Emerson Network Power, Energy Systems, North America, Inc. Any copying, use or disclosure of it without the written permission of Emerson Network Power, Energy Systems, North America, Inc. is strictly prohibited.