Install the Fixture
WARNING:
The installation must always be secured with a secondary safety attachment.
•
An appropriate safety cable is supplied.
Safety cable attachment must be rated by a safety factor of 10.
•
Use of third party clamps are permitted, but they should comply with the
•
local jurisdiction and be approved by the Authority Having Jurisdiction.
A supportive and stable surface must be used when the fixtures are placed
•
on the feet.
The operating temperature range for this fixture is -10°C–45°C (14°F–
•
113°F). Do not operate the fixture outside of this range.
Never stand directly below the installed fixture when mounting, removing,
•
or servicing.
All safety and technical aspects of fixture installation shall be approved by a
•
qualified person before operation.
The installation must be regularly inspected by a qualified person.
•
Overhead rigging must be performed by qualified personnel.
•
Please consider GB7000.1-2015, GB7000.217-2008, and other national
•
norms during the installation.
CAUTION:
Having Jurisdiction. The installation must only be carried out by a qualified
person.
You can install the fixture in any of the orientations shown below.
8
Follow all local codes and recommended practices by the Authority
SolaFrame 3000