Connect Dmx Cables To Fixture - High End Systems SolaFrame 3000 User Manual

Connect DMX Cables to Fixture
The following instructions are guidelines for connecting DMX to your fixture. Your installation
may vary.
1. Connect the male XLR connector of a DMX data cable to the DMX Out connector on the
DMX control source.
2. Connect the female XLR connector of the DMX data cable to the DMX In connector of the
first fixture on the DMX control run.
3. Continue linking the remaining fixtures connecting a cable from the DMX Out connector
of each fixture to the DMX In connector of the next fixture on the control run.
12 SolaFrame 3000