Safety Considerations - High End Systems SolaFrame 3000 User Manual

Safety Considerations

In order to ensure safe operation, follow the safety instructions and warning notes in this user
manual and any instructions from the manufacturer representative.
The SolaFrame 3000 fixture is intended for professional use only. Not for residential use.
•
Read the entire manual before using this equipment.
Contact your High End Systems dealer or High End Systems technical support before
•
performing any service in order to maintain warranty coverage.
WARNING:
use:
This equipment is designed for operation by qualified personnel only.
•
Disconnect the unit from power and DMX before servicing.
•
Replace fuses with the specified type and rating only.
•
Make sure that the available voltage is within the stated range. See
•
on
NEMA Type 1 Enclosure, indoor use, dry locations only. Do not use
•
outdoors. This fixture is intended for use where humidity does not exceed
90% (non-condensing).
Do not use this fixture with a damaged power lead (cord set). If the lead is
•
damaged, it must be replaced with an equivalent type before use. Contact
your local authorized dealer for spare power leads.
Do not use this fixture if the lens, protection screen, or ultraviolet screen is
•
damaged. Damaged lenses must be replaced before use. Contact your local
authorized dealer for a replacement.
When the fixture has been stored or transported in cold temperatures, allow
•
it to warm to room temperature for a minimum of one hour before applying
power. Applying power to a cold fixture may cause damage to the fixture
and void the manufacturer warranty.
This is a Class I device and must be grounded.
•
Do not project the beam onto combustible substances.
•
Keep fixture head at least 0.1 m (0.33 ft) away from any flammable
•
materials.
Minimum distance to lighted objects: 2 m (6.56 ft).
•
When you power on the fixture, you may notice smoke or odor. This is
•
normal and should decrease gradually. If smoke or odor persists, contact
your High End Systems dealer or High End Systems technical support.
WARNING:
cover open.
CAUTION:
and servicing.
6
For your safety, read the following warnings and notices before
page 10.
RISK OF ELECTRIC SHOCK! Do not operate this device with the
Hot Surfaces. Allow the fixture to cool completely before handling
Power
SolaFrame 3000