Select Input
Navigate: Main Menu → Set → Select Input
Select the control input for the fixture:
DMX Only
•
Art-Net On IP2
•
Art-Net on IP10
•
sACN
•
Set Universe for Art-Net
Navigate: Main Menu → Set → Set Universe
When using Art-Net control input, set the universe (000–255).
Access Service Settings
Navigate: Main Menu → Set → Service Setting
Parameter
Service PIN
Ethernet IP
Ethernet Mask
IP
Clr Err Info
Set the Fans Mode
Navigate: Main Menu → Set → Fans Mode Setting
Select the fan mode for the fixture:
Standard
•
Studio (reduces fan noise, but decreases fixture output by ~30%)
•
Continuous
•
18
Value
Password = XXX
XXX.XXX.XXX.XXX
XXX.XXX.XXX.XXX
ON
•
OFF
•
Description
Enter the Service PIN. The default Service PIN is
050. You must enter the Service PIN in order to
access the other Service Setting parameters.
You must enter the Service PIN to access this
parameter.
Modify the IP address. The default IP address is
002.142.058.034.
You must enter the Service PIN to access this
parameter.
Modify the IP subnet mask. The default IP subnet
mask is 255.000.000.000.
You must enter the Service PIN to access this
parameter.
Set this parameter to On in order to clear error
messages after you have fixed the errors. Default
setting is off.
SolaFrame 3000