Ac And Dc Power Supply Wiring Example (Rsg2300 And Rsg2300P); Figure 22: Ac And Dc Power Supply Wiring Examples - RuggedCom RuggedSwitch RSG2300 Installation Manual

2.3.3 AC and DC Power Supply Wiring Example (RSG2300 and
RSG2300P)

Figure 22: AC and DC Power Supply Wiring Examples

Notes:

RSG2300P will always have a 48VDC power supply in position PS2.

110/230VAC rated equipment: A 250VAC appropriately rated circuit breaker
must be installed.

125/250VDC rated equipment: A 300VDC appropriately rated circuit breaker
must be installed.

A circuit breaker is not required for 12-24 or 48VDC rated power supplies.

Separate circuit breakers must be installed and separately identified.

Equipment must be installed according to the applicable country wiring
codes.
RuggedCom®
22
RuggedSwitch RSG2300 Installation Guide Rev108
Installation