Mounting Flexibility; Figure 1: 19" Rack Front Mount (Connectors At Front); Figure 2: 19" Rack Rear Mount (Connectors At Rear) - RuggedCom RuggedSwitch RSG2300 Installation Manual

1.3 Mounting Flexibility

RSG2000 series products have been designed with maximum mounting and
display flexibility. Customers can order an RSG2000 series switch that can be
mounted in a standard 19" rack, 1" DIN Rail, or directly onto a panel. For rack
mount installations, the RSG2000 series can be ordered with connectors on the
front panel or on the rear of the chassis. Placing the connectors on the rear
allows all data and power cabling to be installed and connected at the rear of the
rack. See Figure 1 and Figure 2 for examples of rack mount orientation.

Figure 1: 19" Rack Front Mount (connectors at front)

Figure 2: 19" Rack Rear Mount (connectors at rear)

RuggedCom®
10
RuggedSwitch RSG2300 Installation Guide Rev108
Product Overview