Dc Power Supply Wiring Examples; Figure 9: Dc Power Supply Wiring Examples - RuggedCom RuggedSwitch M2100 Installation Manual

Mil-std 19-port modular managed ethernet switch with gigabit uplink ports

Table of Contents

4.2.2 DC Power Supply Wiring Examples

NOTES:

1. 88-300VDC rated equipment: A 300VDC appropriately rated circuit breaker must be

installed within 3m of unit.

2. A circuit breaker is not required for 12, 24 or 48 VDC rated power supplies.

3. For dual DC power supplies, Separate circuit breakers must be installed and

separately identified.

4. Equipment must be installed according to the applicable country wiring codes.

Rev106

Table of Contents

Do you have a question about the RuggedSwitch M2100 and is the answer not in the manual?