Table of Contents
Advertisement
1.4 Ethernet Panel Description
The Ethernet connector panel of the RSG2300 is organized into three banks of
eight 10/100Tx copper ports, for a total of 24 fixed 10/100Tx ports, and four
modular slots, whose configuration may be selected at the time the unit is
ordered. Figure 3 shows the physical layout of these ports.
Figure 3: RSG2300 Ethernet Port Layout
Slots 1 and 2 support two-port fiber or copper modules up to 100Mbps.
RSG2300P comes standard with a two port 10/100BaseTx 802.3af (PoE) module
in Slot 2, and may be ordered with another two PoE ports in Slot 1.
Slots 3 and 4 support two-port modules up to 1Gbps. Section 3.5 lists and
provides specifications for the fiber optic interfaces available for the RSG2300.
The complement of modules that is installed on a particular unit may be
determined by reading the factory data file via the RuggedSwitch
interface.
Each two-port Ethernet module is equipped with an LED per port that indicates
link/activity status information. The LED is solid for ports with a valid link, and
blinks for activity. Figure 4 shows a copper port module in slot 1 and a fiber
module in slot 2 along with the associated link/activity LEDs for each port.
Figure 4: Ethernet Panel LEDs
RuggedCom®
11
RuggedSwitch RSG2300 Installation Guide Rev108
Product Overview
®
TM
ROS
user
Advertisement
Table of Contents
