ABB UMC100.3 Manual page 149

T E C H N I C A L D ATA
UMC100-PAN
Installation
Degree of protection
LEDs: Red/Yellow/Green
Buttons
Dimensions (WxHxD)
Net weight
Temperature range
Tightening Torque for screw mounting
Micro-USB
Protection cap IP54 (accessory)
DX111-FBP.0 and DX122-FBP.0
General
Mounting
Mounting position
Dimensions (W x H x D)
LEDs: Red/yellow/green
Supply voltage
Supply current
Tightening torque for the communication terminals
Installation in a switchgear cabinet door or on a front panel.
IP52 on front side, mounted with door mounting set
IP54 on front side, mounted with door mounting kit plus protection cap
By default the LEDs have the same meaning as the ones on the UMC100.
Red: Error
Yellow: Motor is running
Green: Ready for operation
6 buttons with fixed meaning
50 x 66 x 15 mm
0.04 kg
Storage -25 ... +70 °C
Operation 0 ... +55 °C
0.5 Nm
Connector for device configuration with PBDTM software
Silicone
On DIN rail (EN 50022-35)
Any
45 x 77 x 100 mm
(excluding communication connector)
Red: Hardware error of module
Yellow: Diagnosis available
Green: Ready for operation
24 V DC (+30 % ... -20 %)
(19.2 ... 31.2 V DC) including ripple
Max. 90 mA (at 19.2 ... 31.2 V DC)
ø 1.5 mm
0.22 Nm
7 mm 1 x 0.14 ... 1.5 mm
0.28 in 28 ... 16 AWG
7 mm 1 x 0.14 ... 1.5 mm
0.28 in 28 ... 16 AWG
7 mm 1 x 0.25 ... 0.5 mm
0.28 in 28 ... 16 AWG
149
2
2
2