ABB UMC100.3 Manual page 134

U M C 1 0 0 . 3 U N I V E R S A L M O T O R C O N T R O L L E R T E C H N I C A L D E S C R I P T I O N
134
VI150-FBP.0 / VI155-FBP.0 Parameters Continued
Parameter Parameter
Number Name
212 P High Trip
Level
213 P High Trip
Delay
214 P High Warn
Level
215 P High Warn
Delay
216 Nominal Power
Factor
217 Power Scale
Factor
219 THD Warning
Level
222 THD Warning
Delay
220 Load Startup
Delay
Description, Explanations
Above this value a trip is generated
200 (1000%) disables the function
Delay time until an high power trip is triggered
Above this value a warning is generated
200% (1000) disables the function
Delay time until an high power warning is triggered
Power factor value from the name plate or data sheet of the
motor
Factor that can be used to scale the active and apparent
power so that the resulting value fits in a WORD. This is
needed for bus transfer.
Above this level of Total Harmonic Distortions a warning is
triggered
Delay time until an warning is triggered
Delay time until load (e.g. pump) has started up and power
supervision functions should become active.
Options
100 ... 1000% in steps of 5%
Unscaled: 20...200
Example: 20 means 100%
0...255s in steps of 1s
Default: 10s
100 ... 1000% in steps of 5%
Unscaled: 20...200
Example: 20 means 100%
0...255s in steps of 1s
Default: 10s
0.01 ... 1 in steps of 0.01
Default: 1
Unscaled: 1...100
Example: 75 means a PF of 0.75
0 = 1
1 = 10
2 = 100
3 = 1000
Example: U is 400V, Ie is 200A,
e
Rated PF is 0,8.
The nominal active power is then
400*200*1,73*0,8 = 110720.
To transfer this value via fieldbus
it must be scaled e.g. by 10. So
the resulting value is 110720/10
= 11072 which fits in a WORD.
3 ... 10% in steps of 1%
10 disables the function
0 ... 255 s in steps of 1s
Default is 5s
0 ... 255 s in steps of 1s
Adjustable via
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22
All excluding GSD-PDQ22