ABB UMC100.3 Manual page 111

T H E LC D C O N T R O L PA N E L U M C 1 0 0 - PA N
Starting and Stopping the Motor
If control via LCD panel was enabled, it is possible to start/stop the motor from the 'Control' menu which can be accessed from the
top level menu when pressing the left hot key (Cntrl). Depending on the selected control function a list of possible start directions
is displayed. Pressing the green start button starts the motor in the selected direction. Pressing the red stop button stops the mo-
tor. The motor status icons show you the present status of the motor.
Available commands
are dependent of the
selected starter function
Back to main menu
Select next option
Main menu
Cntrl (left hotkey)
Motor control menu
Present motor status
(stopped)
Select previous option
Start motor in selected
direction (if possible)
Motor stop
(if possible)
111