ABB UMC100.3 Manual page 103

T H E LC D C O N T R O L PA N E L U M C 1 0 0 - PA N
Masks on the top level and the main configuration menu masks.
Main menu
Feldbus
address
Motor
current[%]
Motor
current [A]
(average, and
each phase)
Voltages*
Active power*
Power Faktor*
Status UMC
Digital Inputs
Status UMC
Digital outputs
User defined
masks(1-5)
With the right soft key
sections. The masks shown with a star * are only displayed if the voltage module is present.
From any
menu point
(right hotkey)
from any
menu point
(left hotkey)
you can enter the selected submenus which are described in the following
Main Configuration Menu
(e.g. changed parameters)
1: Motor Management
(e.g. control function)
2: Protection
(e.g. trip class)
3: Communikation
(e.g. bus address)
4: I/O modules
(e.g. DI function)
5: Display
(e.g. language)
6: Maintenance/Service
103