Webrtc; Technical Specifications - Avaya Scopia Elite 6000 Administrator's Manual

You can easily create a file containing logs and settings which you can send to Customer
Support for troubleshooting.
• Interactive Voice Response (IVR) messages
The MCU includes pre-recorded greetings to participants and announcements as each new
participant joins a meeting. You can record messages to provide custom greetings and
announcements, but typically Avaya Equinox Management supplies these messages across
all MCUs in the organization.
• SIP Firewall traversal compatibilities
The MCU is fully interoperable with third-party Session Border Controllers (SBC), which
increases compatibility and dexterity with SIP endpoints that join remotely.

WebRTC

®
Scopia Elite 6000 MCU supports WebRTC clients through an external WebRTC gateway. It is
supported both in Over The Top and Team Engagement deployments.
®
Scopia Elite 6000 MCU is connected to WebRTC clients through a virtual gateway. In such a
scenario, the Equinox Media Server OVA file is deployed with the medium configuration and set to
the WebRTC Gateway mode. When WebRTC clients join a meeting. the clients are connected
through the gateway to Scopia

Technical specifications

This section details the system specifications of the MCU you purchased. Refer to this data when
preparing system setup and afterwards as a means of verifying that the environment still complies
with these requirements.
Hardware requirements
The following table refers to the physical details of the device:
Table 1: Physical device specifications
System power requirements
Input
AC Input
December 2017
®
Elite 6000 MCU.
Scopia Elite MCU 6105, 6110
and 6120
100-240 VAC, 50/60 Hz
600W output @ 100-240V, 7.5A,
50-60Hz
Administrator Guide for Avaya Scopia
Comments on this document? infodev@avaya.com
Technical specifications
Scopia Elite MCU 6140
100-240 VAC, 50/60 Hz with hot-
swap redundant AC power
supply and feed (optional)
1000W output @ 100-120V,
12-10A, 50-60Hz
Table continues...
®
Elite 6000 MCU 13