Wireless Time Control - Technicolor TG789vac v2 Setup And User Manual

9.4 Wireless Time Control

Introduction
Wireless Time Control allows you to restrict wireless access to one or two sessions. This means that your wireless devices will
not be able to connect to the Internet (or your local network) outside these time frames.
Depending on the software version used by your service provider, this feature may not be available on your
TG789vac v2.
Warning
Make sure that the persons that use a wireless connection are aware of these time frames. This to avoid the loss of data or
unexpected service interruption.
Requirements
Before you can start:
• Your TG789vac v2 must be connected to the Internet.
• Your TG789vac v2 must use a time server for its time configuration.
For more information, see
Procedure
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Home Network, click Access Control.
3 The Access Control page appears. In the Pick a task list, click Wireless Time Control.
4 The Wireless Network Time Control page appears.
5 Select the Enable Schedule box.
6 Select a start time and end time for the first session.
7 Select a start time and end time for the second session.
8 Click Apply.
The schedule is now active.
DMS3-CTC-25-282 v1.0
"8.4 Network time server" on page
"3.1 TG789vac v2 GUI" on page
78.
28.
9 Internet security
90