Status Leds - Technicolor TG789vac v2 Setup And User Manual

1.3.6 Status LEDs

Introduction
On the top panel of your TG789vac v2, you can find a number of status LEDs, indicating the state of the device.
Info LED
Info
The ( ) LED provides information about the overall state of your TG789vac v2. For more information, see
On/Off button" on page
Colour
Green
Blue
Red
Orange
Off
The other status LEDs are only activated when the Internet service is down.
DMS3-CTC-25-282 v1.0
10.
State Description
Solid on All services are available. The wireless access point is enabled. The other
status LEDs are deactivated.
Solid on All services are available. The wireless access point is disabled. The other
status LEDs are deactivated.
Solid on Some services are not available. The TG789vac v2 automatically activates
the other status LEDs to allow you to see which services are running.
Solid on Bootloader selftest
Blinking Bootloader active (during upgrade)
The TG789vac v2 is powered off.
1 Getting started
Info
Broadband
Internet
Wireless 2.4 GHZ
Wireless 5 GHZ
WPS
Ethernet
TV
Voice
"Wireless
11