Configuring Wpa-Psk Encryption - Technicolor TG789vac v2 Setup And User Manual

4.4.2 Configuring WPA-PSK encryption

Procedure
Proceed as follows:
1 Browse to the
For more information, see
2 On the left menu, click Home Network.
3 The Home Network page appears, Under Wireless. click:
 WLAN to view the settings of the 2.4 GHz access point.
WLAN_5G to view the settings of the 5 GHz access point.

4 The Wireless Access Point page appears. In the upper-right corner, click Configure.
5 In the Security Mode list, select one of the following modes:
WPA-PSK

 WPA2-PSK
 WPA-PSK + WPA2-PSK
For more information, see
6 In the WPA-PSK Encryption Key box, type a the key of your choice. The key must be in one of the following formats:
 8 to 63 alphanumeric characters. For example: MyKey123
 8 to 64 hexadecimal characters (characters from 0 to 9 and from A to F). For example: C54F48A5.
7 Click Apply.
8 Reconnect your wireless client(s) to the TG789vac v2 using these new security settings.
For more information, see
without WPS" on page
DMS3-CTC-25-282 v1.0
TG789vac v2 GUI.
"Accessing the TG789vac v2 GUI" on page
"Encryption types" on page
"4.1 Connecting your wireless client via WPS" on page 36
38.
29.
40.
4 Wireless networking
or "4.2 Connecting your wireless client
42