Technicolor TG789vac v2 Setup And User Manual page 16

Manually activating the status LEDs
If the Info ( ) LED is green or blue, you can press the Info (
Broadband LED (if you are using the DSL Gateway scenario)
Colour
Green
Off
Broadband LED (if you are using the Local Router scenario)
Colour
Green
Off
Internet LED
Colour
Green
Red
Off
Wireless LED
Colour
Green
DMS3-CTC-25-282 v1.0
State Description
Solid on DSL line synchronised
Blinking Trying to detect carrier signal or pending DSL line synchronisation
No DSL line connected
- or -
The status LEDs are deactivated
- or -
TG789vac v2 powered off.
State Description
Solid on Connected to the WAN device.
Not connected to the WAN device or the status LEDs are deactivated.
State Description
Solid on Connected to the Internet, no activity
Blinking Connected to the Internet, sending/receiving data
Solid on Failed to setup the Internet connection
No Internet connection or the status LEDs are deactivated.
State Description
Solid on Wireless clients connected, no wireless activity.
Blinking Wireless clients connected, wireless activity.
) button to temporarily activate the other LEDs.
1 Getting started
12