Protecting Access To The Tg789Vac V2 - Technicolor TG789vac v2 Setup And User Manual

3.1.3 Protecting access to the TG789vac v2

Introduction
To prevent that every user on your local network can access the TG789vac v2, the TG789vac v2 is secured with a user name
and password.
Protected items
The user name and password is used to secure access to:
• The TG789vac v2 GUI.
• The embedded FTP Server.
for more information, see
Default user name
The default user name is Administrator.
Default password
The default password is either blank or the ACCESS KEY printed on the label of your TG789vac v2. This depends on the
settings chosen by your Service Provider.
It is recommended to change the default password settings.
Choose a password that your can easily remember or write it down. If you forget your password the only option is to
reset your TG789vac v2. For more information, see
How to change your password
Proceed as follows:
1 On the Toolbox menu, click User Management.
2 In the Pick a task list, click Change my password.
3 Enter your new password and click OK.
4 Your new password is now active. The next time that you log on to the
password.
This password will also be used by the network file server and FTP server.
For more information about the network file server and FTP server, see
DMS3-CTC-25-282 v1.0
"7.3 The TG789vac v2 FTP server" on page 63.
"10.6 Reset to factory defaults" on page
TG789vac v2 GUI
"7 Sharing content" on page 54
3 Configuration tools
98.
you will have to enter this
32