Configuring Upnp On The Tg789Vac V2 - Technicolor TG789vac v2 Setup And User Manual

8.1.3 Configuring UPnP on the TG789vac v2

Introduction
On the TG789vac v2 GUI
• Enable/Disable
• Enable/Disable
Enable/Disable UPnP
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
 Select the Use UPnP check box, to enable UPnP.
 Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled, only limited UPnP operation between the host and the TG789vac v2 is allowed:
• A local host is not allowed to connect/disconnect the TG789vac v2 Internet connection. You can then only connect/
disconnect the Internet connection via the
• Address translation mappings can only be added or changed via UPnP for host that have the UPnP application running.
Extended Security is enabled by default.
Enable/Disable Extended Security
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.
DMS3-CTC-25-282 v1.0
you can:
UPnP.
Extended Security.
"Accessing the TG789vac v2 GUI" on page
TG789vac v2 GUI
"Accessing the TG789vac v2 GUI" on page
29.
29.
8 Network Services
72