7.2.1 Configuring the UPnP AV media server
Introduction
This section helps you to set up the TG789vac v2 UPnP AV media server
Enabling/disabling the UPnP AV media server
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Toolbox menu, click Content Sharing.
3 In the
Navigation
4 Under UPnP AV Media Server, click Server Enabled.
5 Click Apply.
Media database
When you plug in your USB storage device, the TG789vac v2 will automatically start building the
database lists all meta data that is embedded the your media files stored on your USB storage device.
To view the status of the media database:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Toolbox menu, click Content Sharing.
3 In the
Navigation
4 Under UPnP AV Media Server, you can find the Database Status.
5 If you want to rebuild the database, click Rebuild.
DMS3-CTC-25-282 v1.0
"Accessing the TG789vac v2 GUI" on page
bar, click Configure.
"Accessing the TG789vac v2 GUI" on page
bar, click Configure.
29.
media
29.
7 Sharing content
database. This
60