Configure The Tg789Vac V2 - Technicolor TG789vac v2 Setup And User Manual

2.4 Configure the TG789vac v2

Introduction
If your service provider did not preconfigure your TG789vac v2, you may have to configure the TG789vac v2 via its
Graphical User Interface (GUI).
Requirements
JavaScript must be enabled on your web browser (this is the default setting). For more information, consult the help of your
web browser.
Procedure
Proceed as follows:
1 Open your web browser.
2 The TG789vac v2 informs you that you have not yet configured your TG789vac v2.
If this window does not appear, browse to
192.168.1.254) and click MediaAccess Gateway on the menu on the left-hand side.
3 Click Setup my MediaAccess Gateway.
4 The Easy Setup wizard appears. This wizard will guide you through the configuration of your TG789vac v2. Click Next
and follow the instructions.
DMS3-CTC-25-282 v1.0
http://dsldevice.lan or to the IP address of your TG789vac v2 (by default:
2 Setup
23