Access From The Internet - Technicolor TG789vac v2 Setup And User Manual

3.3 Access from the Internet

Modes
To access your TG789vac v2 GUI from the Internet, you can choose between two modes:
• Permanent Mode (Remote Access):
The remote session ends when you disable remote assistance or after restarting your TG789vac v2.
• Temporary Mode (Remote Assistance):
The remote session ends when you disable remote assistance, after restarting your TG789vac v2 or after 20 minutes of
inactivity.
To enable Remote Assistance / Remote Access
Enabling remote assistance is only possible when you are connected to the Internet.
To enable remote assistance/access:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 Complete and check the following parameters:
Mode:

Select the mode that you want to use.
 URL:
Contains the URL that must be used to access the TG789vac v2 from the Internet.
User name:

The user name needed to access your TG789vac v2 remotely.
 Use Random password and Password:
• Click the Use Random password check box if you want the TG789vac v2 to generate a random password. The
password will appear in the Password box as soon as you enable remote assistance.
• Clear the Use Random password check box if you want to choose the password yourself. Enter the password of
your choice in the Password box.
3 Click Enable Remote Access or Enable Remote Assistance.
Accessing your TG789vac v2 from the Internet
Proceed as follows:
1 Open your web browser.
2 Type the URL that was listed in the URL field on the Remote Assistance page (for example https://141.11.249.150:51003).
You can replace the IP address in this URL by the dynamic DNS host name if you enabled and configured
Dynamic DNS. For more information, see
Example: https://141.11.249.150:51003 can be replaced by https://mygateway.dyndns.org:51003.
3 Enter the user name and password that you specified on the Remote Assistance page.
4 The TG789vac v2 GUI appears.
It is now possible for a remote user to access your TG789vac v2 via the specified URL using the provided user name and
password.
DMS3-CTC-25-282 v1.0
"Accessing the TG789vac v2 GUI" on page
"8.3 Dynamic DNS" on page
29.
77.
3 Configuration tools
34