Wireless Time Control - Technicolor MediaAccess TG788VN Setup And User Manual

10.4 Wireless Time Control

Introduction
Wireless Time Control allows you to restrict wireless access to one or two sessions. This means that your wireless devices will
not be able to connect to the Internet (or your local network) outside these time frames.
Depending on the software version used by your service provider, this feature may not yet be available on your
MediaAccess Gateway.
Warning
Make sure that the persons that use a wireless connection are aware of these time frames. This to avoid the loss of data or
unexpected service interruption.
Requirements
Before you can start:
Your MediaAccess Gateway must be connected to the Internet.

Your MediaAccess Gateway must use a time server for its time configuration.

For more information, see
Procedure
1 Browse to the Technicolor GUI.
For more information, see
2 On the Home Network, click Access Control.
3 The Access Control page appears. In the Pick a task list, click Wireless Time Control.
4 The Wireless Network Time Control page appears.
5 Select the Enable Schedule box.
6 Select a start time and end time for the first session.
7 Select a start time and end time for the second session.
8 Click Apply.
DMS-CTC-20120510-0000 v1.0
"9.4 Network Time Server" on page
"4.1 MediaAccess Gateway GUI" on page
10 INTERNET SECURITY
88.
32.
101