Configuring Wpa Encryption - Technicolor TG789vac v2 Setup And User Manual

4.4.1 Configuring WPA encryption

Procedure
Proceed as follows:
1 Browse to the
For more information, see
2 On the left menu, click Home Network.
3 The Home Network page appears, Under Wireless. click:
 WLAN to view the settings of the 2.4 GHz access point.
WLAN_5G to view the settings of the 5 GHz access point.

4 The Wireless Access Point page appears. In the upper-right corner, click Configure.
5 In the Security Mode list, select one of the following modes:
WPA

 WPA2
 WPA+WPA2
For more information, see
6 The following RADIUS settings are now available for configuration:
 WPA Radius IP: enter the IP address of your RADIUS server.
 WPA Radius Port: enter the WPA Radius Port.
 WPA Radius Key: enter the WPA Radius Key.
7 Click Apply to immediately apply your changes.
8 Reconnect your wireless client(s) to the TG789vac v2 using these new security settings.
For more information, see
without WPS" on page
DMS3-CTC-25-282 v1.0
TG789vac v2 GUI.
"Accessing the TG789vac v2 GUI" on page
"Encryption types" on page
"4.1 Connecting your wireless client via WPS" on page 36
38.
29.
40.
4 Wireless networking
or "4.2 Connecting your wireless client
41