Network Time Server - Technicolor TG789vac v2 Setup And User Manual

8.4 Network time server

Introduction
A Network Time Server is a server that makes sure that the time settings of your TG789vac v2 are perfectly synchronized
with the official time.
This time will be used for features like:
• Access Control
For more information, see
• Wireless Time Control
For more information, see
• Call logs
• Event logs
Requirements
Your TG789vac v2 must be connected to the Internet.
Specifying a time server for your TG789vac v2
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the MediaAccess Gateway menu, click Configuration.
3 The System Configuration page appears. On the
4 Under Time Configuration, select Auto-configuration and configure the following settings:
 Time Zone:
Select your time zone from this list.
 Summer Time:
Select Summer Time if you want the clock to follow daylight saving time.
DMS3-CTC-25-282 v1.0
"9.3 Access Control" on page
"9.4 Wireless Time Control" on page
"Accessing the TG789vac v2 GUI" on page
Navigation
88.
90.
29.
bar, click Configure.
8 Network Services
78