The Tg789Vac V2 Ftp Server - Technicolor TG789vac v2 Setup And User Manual

7.3 The TG789vac v2 FTP server

Introduction
The TG789vac v2 allows you to access your shared content by FTP. This can be useful if you want to be able to access your
shared content from the Internet.
Via FTP you can
Setting up the FTP server
Proceed as follows:
1 Protect your account with a
2 Enable the FTP server and select the managed
Protect your account with a password
If you did not yet configure your login to the
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Toolbox menu, click User Management.
3 In the Pick a task list, click Change my password.
4 Leave the Old Password box empty.
5 Type your new password both in the New Password box and Confirm New Password box.
Enable the FTP server and select the managed partition
Proceed as follows:
1 Browse to the TG789vac v2 GUI.
For more information, see
2 On the Toolbox menu, click Content Sharing.
3 In the Navigation
4 Under FTP Server, click Server Enabled.
5 Under List of connected disks, click the radio button next to the partition to make it managed.
6 The TG789vac v2 now creates a Media and Shared folder on the selected partition. The Shared folder will be used as
root location for FTP sessions.
The Media folder is not accessible via FTP and can only be accessed via the network file server and the UPnP AV
media server.
7 Click Apply.
DMS3-CTC-25-282 v1.0
download and upload all types of files both from your
password.
"Accessing the TG789vac v2 GUI" on page
"Accessing the TG789vac v2 GUI" on page
bar, click Configure.
local network and the
partition.
TG789vac v2 GUI with a password:
29.
29.
7 Sharing content
Internet.
63