Chapter 1: System Overview; System Example; System Components - Uponor Climate Control Zoning System II Installation And Operation Manual

Chapter 1
System overview
The Uponor Climate Control Zoning System II is for use
with underfloor heating installations and combines comfort,
user friendliness and temperature control for each individual
room of a home.
The system consists of a base unit, thermostats and actuators.
The base unit manages the operation of the actuators when
the thermostats detect a demand for the heating.
The system is controlled by different types of thermostats.
Designed for maximum comfort, the thermostats communicate
with the base unit by radio link. It is possible to mix the
different types of thermostats in the same installation.

System example

The illustration below shows the system with several installation
options and thermostats.
A
B
Figure 1-1: Installation options
Item Part no. Description
A A3800167 Wireless Digital Thermostat (T-167)
B A3800165 Wireless Dial Thermostat (T-165)
C A3801165 Wireless Base Unit, 6 zones (X-165)
D A3010100/ External relay for pumps
A3080301
C
D
Climate Control Zoning System II installation and operation manual | Chapter 1 – System overview l 1
Figure 1-2: Installation examples
Note: The floor sensor can connect to both digital and
dial thermostats.

System components

Item Part no. Description
A A3801165 Wireless Base Unit, 6 zones (X-165)
B A3801160 Wireless Base Unit Expansion Module,
6 zones (M-160)
C A3800167 Wireless Digital Thermostat (T-167)
D A3800165 Wireless Dial Thermostat (T-165)
A
Figure 1-3: System components
C
D
B