Unregistering All Channels - Uponor Climate Control Zoning System II Installation And Operation Manual

Unregistering all channels

When one or more channels are inaccurately registered,
it is possible to remove all registrations at the same time.
Caution: Make sure the base unit is in run mode.
Refer to the instructions below to cancel all
channel registrations.
1. Press and hold the OK button on the base unit until
the LED for channel 1 flashes red/green, or the first
unregistered channel flashes red.
2. Press the < and > buttons simultaneously until the LEDs
for all channels except one turn off (about 10 seconds).
The one remaining flashes red.
22 | uponorpro.com