Installing The Antenna; Attaching The Antenna To A Base Unit; Attaching The Antenna To A Wall; Connecting The Antenna Cable - Uponor Climate Control Zoning System II Installation And Operation Manual

Installing the antenna

The antenna can be attached to the right-hand side of the
base unit or to the wall. If the base unit is installed inside a
metal cabinet, the entire antenna must be placed vertically
outside the cabinet, as illustrated below.
Figure 3-3: Antenna installation options
Important! The antenna must be installed
vertically for best coverage.

Attaching the antenna to a base unit

The ilustration below shows the antenna attached to the
right-hand side of the base unit.
Figure 3-4: Attaching the antenna to a base unit
8 | uponorpro.com

Attaching the antenna to a wall

The illustration below shows the antenna attached to a wall
with screws (A) or double-sided adhesive strips (B).
A
B
Figure 3-5: Attaching the antenna to a wall

Connecting the antenna cable

Connect the antenna to the base unit using the supplied
antenna cable.
Figure 3-6: Connecting the antenna cable