Technical Specifications; Cables; Base Unit Layout - Uponor Climate Control Zoning System II Installation And Operation Manual

Technical specifications

Cables

Cable from base unit to antenna
Cable from base unit to actuator
External sensor cable to thermostat
Floor sensor cable to thermostat
Outdoor sensor cable to thermostat

Base unit layout

A B
C
Figure A-1: Base unit layout
Item Description
A Fuse (T5 F3.15AL 250 V)
B Optional inputs and outputs (pump and boiler management, and heat pump
connection)
C Channel registration buttons
D LEDs for channels 01 – 06
E Quick connectors for actuators
F MicroSD card
G Power LED
H Wireless Base Unit Expansion Module, 6 zones (A3801160) (optional)
I Wireless antenna, RJ-45 connector
36 | uponorpro.com
Standard
cable length
1.6' (0.50 m)
2.5' (0.75 m)
16' (5 m)
16' (5 m)
-
D
E
Maximum
cable length Wire gauge
16' (5 m) CAT.5e or CAT.6, RJ 45 connector
65' (20 m) Base unit: 0.2 mm² to 1.5 mm²
16' (5 m) 0.6 mm²
16' (5 m) 0.75 mm²
16' (5 m) Twisted pair
G
F
H I