Installation Example - Uponor Climate Control Zoning System II Installation And Operation Manual

Installation example

The figure below shows an installation example of the
base unit (six channels) with an optional expansion module
(six extra channels) using thermostats and actuators.
Thermostats will regulate each room according to their set
temperatures.
• Thermostat 01 controls the actuators on channels
01a, 01b, 02a and 02b with an optional AC sensor.
• Thermostat 03 controls the actuators on channels 03 to 05.
• Thermostat 06 controls the actuators on channels 06 and 07.
• Thermostat 08 controls the actuators on channels 08 to 10
with an optional AC sensor.
• Thermostat 12 controls the actuators on channels 11 and 12.
A3800167
01
T
Option
A or B
A3801165
01
S
01a 01b 02a 02b
T
24 24
VAC VAC
Option A
Figure 2-2: Installation example
6 | uponorpro.com
A3800165 A3800165
03
T
02 03 04 05
03 04 05
24 24 24 24
VAC VAC VAC VAC
Option B
Option A
• External temperature sensor
• Floor temperature sensor
Option B
• Outdoor temperature sensor
A3800167
06 08
T T
Option
A or B
06 07 08
24 24 24 24
VAC VAC VAC VAC
A3800165
12
T
A3801160
09 10 11 12
Note: Refer to page 37 for additional
24 24
VAC VAC
wiring information.
Caution: Only 24 VAC
Uponor actuators are
compatible with the
base unit.