Monthly: (Plus Daily And Weekly Preventive Maintenance) - Precor TRM10/GEN06 Service Manual

Treadmill base
Table of Contents

Advertisement

CAUTION: If the towel becomes loose it may be pulled into the treadmill's
rollers. Pull the safety key tether to stop the treadmill and retrieve
the towel, no damage should occur. Start the procedure over again. See
Figure Below.
7 Keep one hand firmly grasped on the towel, use your other hand to pull
on the safety stop key tether to stop the treadmill running belt. See
Figure Below.
8 Turn the power off. Place your hands on the towel and push it up and
down the length of the running deck several times to clean the deck.
9 Remove the towel.
10 Turn the power on.

Monthly: (Plus Daily and Weekly Preventive Maintenance)

1 Turn off power switch/circuit breaker, and unplug the power cord from
the wall outlet.
2 Clean the treadmill's frame using a cloth dampened with water or a
solution of SimpleGreen® and water (1 part SimpleGreen® to 30 parts
Water). (Do not use acidic cleaners, and do not spray liquid directly
on the machine). Use water and a soft nylon scrub brush to clean the
top surface of the running belt, wiping excess water quickly so as not
to allow liquid to flow underneath the belt.
3 Wipe the surface of the electronic console with a damp sponge or soft
cloth (Do not use acidic cleaners, and do not spray liquid directly on
the machine), and dry with a clean towel.
electronic components to prevent electrical shock or damage.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Keep liquids away from
Page 129

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents