Precor TRM10/GEN06 Service Manual page 120

24 Adjust the drive belt tension per the Procedure,
(on page 119).
Tension
25 Move the running belt so that the seam is underneath the treadmill.
26 Tensioning the Running Belt as per procedure,
(on page 122) and Running Belt Tracking Adjustment as per procedure
,Running Belt Tracking Adjustment
27 Replace the belt guard, ensuring the belt guard tabs are firmly locked
in the frame locking tabs and snapped onto the take up roller shaft.
28 Replace the end caps.
29 Replace both running deck trim strips and motor cover.
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
(on page 124).
Adjusting Drive Belt
Tensioning the Running Belt
Page 118