4.1.2 Trunk Port Assignment
Used to assign each trunk port in the system to one of up to 48 trunk groups.
Value Range
Parameter
(default)
Card No.
XXX : YYY
XXX : Card No.
YYY : Card Type
Group No.
(DID card :47)
(Others : 1)
Status
1. OUS
2. INS
3. FAULT
Specifies the physical number of the trunk card and its
type, which you are going to program.
(101-314)
1 - 48
Specifies the trunk group number (1 - 48) to which the
trunk port is assigned.
[Note]
• Each trunk port must be assigned to a Trunk Group.
This program defines the Trunk Group assignment for
each trunk port.
Specifies the operating status of the trunk port.
1. INS: The trunk port is In-Service.
2. OUS: The trunk port is Out-of-Service.
3. FAULT: The trunk port is defective.
Description/Function
System Programming
Reference
None
Trunk Group
Sec. 4.3.1
Trunk Group
(F/G)
None
4-13